Beehive progess report – Turned.Out.Right Woodturning

I worked most of last weekend on honey-do’s but I did get to the Beehive.This week will be spent on the bee itself.

Its always fun when you model something on a computer and then you see it evolve in real life. I now use the Donny Virtual Lathe to start and plan many of my projects. The evolution of the beehive from modeling to actual turning is detailed below. Click any of the pictures to enlarge them.

I use the model printed in full scale as the story stick. From this picture I translate dimensions with my caliper to the turned piece. Precise dimensions are not important but this helps me to keep perspective and proportion throughout the turning process.
The model was designed for turning from a couple of 2 inch thick 4×4 blanks of Osage Orange. I find this to be one of the advantages of modeling. I can insure my design fits in the blanks envelope while retaining the design aesthetics. Many times I have gone to the lathe with and idea and by the time I fit it to the material I lost the design proportions.
Cut a square piece of backing material (MDF) that will fit diagonally into your chuck (3×3). Mark the mount and the blank with diagonals to locate the center of each. Drill a hole in the mount and using a nail align the mount to the center of the blank and draw the outline of the mount on the blank. Glue the blanks with CA on the center of the mount using the outline as a guide. The upper picture shows the blank mounted in the chuck and turned round This method of mounting blanks is simple because no turning is necessary. I make up a dozen of these backers squares ahead of time.
The bottoms blank mounted in the chuck by the backing material and turned round. Osage Orange is very hard and cutting cross the grain requires sharp tools and patience.
The bottom of the beehive is turned to match the story stick. It would have been very difficult to get the proportions right if I was to do this freehand and without a story stick, since the bottom is turned separate from the top.
Hollowing the bottom with a termite tool. I haven’t used this tool much but I’m starting to like it. Its cuts hard cross grain smoother than anything else I have tried.
The completed bottom with the mortise to accept the top.
The top was mounted to a backer and its mortise was turned along with its initial hollowing. I used a second chuck for this because I didn’t want to remove the bottom from its chuck and loose its centering. This step requires careful turning and fitting of the tenon into the bottom until the top and bottom have a tight fit.
The top is now mated with the bottom on the lathe between centers and the shape of the top is turned.	Gamer dvd
The top is then re-mounted in a chuck and the final hollowing is completed. At this point the top of the beehive still needs final turning.
The top is inserted in the chucked bottom and they are mounted between centers. The tail stock is fitted with a blunt live center so as not to wear a hole in the top. The domed top is then turned.
A jam chuck is made that fits in the chuck jaws.
The top is then inserted and taped into the jam chuck for finish turning and sanding of the inside.
The final beehive showing its features.

Slither psp

3 thoughts on “Beehive progess report”

mary
November 2, 2007 at 3:37 pm

Donnie:

You have worked so hard! It looks totally beautiful. It is so touching that you’re working so hard on a project with me in mind… I guess you really are trying to make up for rolling me up in the carpet!! haha. Seriously, I am very touched….What a great big bro you are…..

lovvvvvvvve

mary
Pingback: New “Woodturning with Sketchup” Blog | Turned.Out.Right Woodturning Web-shop
Pingback: The Beehive is done! | Turned.Out.Right Woodturning Web-shop

3 thoughts on “Beehive progess report”

Leave a Comment Cancel Reply